Sending Binary file over TCP inserts additional data
Hi, Thank you for your feedback. Turn off the TelAutoDetect entry in the teraterm.ini file. For details, refer to in the following page: http://ttssh2.sourceforge.jp/manual/en/setup/teraterm-com.html#detecttelnet
Thank you. That change worked for me. I looked everywhere in the setup menu and didn't find anything. I didn't think to look in the setup.ini file. Sorry for causing noise in your bug tracker. ~James
doda 
Tera Term
Establish connection:
1) File->New Connection
2) Select TCP/IP
3) Enter IP address
4) Select Service:Other
5) Enter TCP Port #
6) Leave SSH Version and Protocol as default
Send File
1) File->Send file...
2) Select option Binary
3) Select file
4) Press Open button
The file is sent to the connection. The issue I am seeing is that if my file contains the byte 0x0D, then an extra byte of 0x00 is inserted into the data stream. I have verified that my binary file contents are correct. I used Wireshark to verify the data being sent over the TCP/IP connection and that indeed the 0x00 is being inserted into the data stream after the 0x0D.